AdamDU (Data Utility) is a program that allows you to quickly and easily capture data from an Adam balance or scale. It can perform various functions on the collected readings. This guide will show you how to download and set up AdamDU on your computer after purchasing it. A license for a single computer costs $95.

Step 1

Go to

Step 2

Click on “Activate Now”.

Click on

Step 3

Enter your license key and the balance you will use with AdamDU.

Step 4

Hit “Submit” once you entered the data correctly.

Align Black Metal Support With Top Pan

Step 5

A pop-up will ask you to open adamdu.msi. Click “Save File”. 

Screw Black Metal Support to Scale

Step 6

The file will be in your Downloads. Click on it to open it.

Take Thumb Screws Off Metal Bracket

Step 7

Click on “OK”.

Remove End-cap from Indicator Left Side

Step 8

Run the file.

Note: Your computer might ask you if you’re sure you want to do this or say the file might not be safe. Confirm you want to run the file.

Step 9

The Setup Wizard will pop up. Click “Next” to continue installing AdamDU.

Removing Molex from PC Board

Step 10

The installer will prompt you to choose a location. You can choose your own, or keep the default location. Once you’re satisfied with the location, press “Next”.

Unscrewing Black Cap from Pillar

Step 11

The Installer is ready to install AdamDU. Click on Install to proceed.

Feeding Molex Through Pillar

Step 12

Once the installation is finished, click “Finish” to end the installation process:

Pull Cable Through Black Cap

Step 13

There should be an AdamDU shortcut on your desktop. Double click on it to run it. If not, go to the location you picked and run the program.

Put Pillar Cap Back On

Step 14

There will be a license check. If you already purchased AdamDU, the license number will be filled out and you can click “Activate Adam DU Now”.

Place Pillar Against Metal Support

Step 15

A license agreement will pop up. Please read the license agreement. Accept the license agreement to use AdamDU by checking the box that says “I ACCEPT the License Agreement”.

Step 16

You will be brought to this screen:

View Beveled Screw Holes on Back of Support

Congratulations, you have successfully installed AdamDU!